Radon Checklist

Radon Checklist

For reliable test results, follow this Radon Testing Checklist carefully.

Testing for radon is not complicated. Improper testing may yield inaccurate results and require another test. Disturbing or interfering with the test device, or with closed-house conditions*, may invalidate the test results and is illegal in some states. If the seller or qualified tester cannot confirm that all items have been completed, take another test.*

Closed-House Conditions

Closed-house conditions means keeping all windows closed, keeping doors closed except for normal entry and exit, and not operating fans or other machines which bring in air from outside. Fans that are part of a radon-reduction system or small exhaust fans operating for only short periods of time may run during the test.

Before Conducting a Radon Test:

    1. Notify the occupants of the importance of proper testing conditions. Give the             occupants written instructions or a copy of this Guide and explain the directions         carefully.

    2. Our radon test requires a minimum of 48 hours.

    3. It is important to maintain closed-house conditions for at least 12 hours before         the beginning of the test and during the entire test period.

    4. EPA recommends that closed house conditions be maintained.

    5. If you hire someone to do the test, hire only a qualified individual.

    7. The test should include method(s) to prevent or detect interference with testing         conditions or with the testing device itself. If the house has an active radon-         reduction system, make sure the vent fan is operating properly. If the fan is not         operating properly, have it (or ask to have it) repaired and then test.

During a Radon Test

     1. Maintain closed-house conditions during the entire time of a short term test,          especially for tests shorter than one week in length.

     2. Operate the home’s heating and cooling systems normally during the test.

     3. Do not disturb the test device at any time during the test.

     4. If a radon-reduction system is in place, make sure the system is working          properly and will be in operation during the entire radon test.

After a Radon Test:

      1. Be sure to complete the required information, including start and stop times,           test location, etc.

      2. If an elevated level is found, fix the home.

      3. Contact a qualified radon-reduction contractor about lowering the radon level.

EPA recommends that you fix the home when the radon level is 4 pCi/L or more.